chip

kako se kreću cijene chipova za playstation 2?

ima li više vrsta?

u Zagrebu mars3 +ugradnja 300-350kn!!!

pa imas taj mars 3 i drugi chip, samo moras stavit prije
nutra program da ti ocitava divxe!!!
imas vise vrsta memory card al najblolja i najsigurnija je
od sony 8mb
cijene ti se krecu cirka 200kn, al negdje mozes jeftinije, oli skuplje proc!!!

fLiP piše: kao prvo vjerojatno sam pokraden,jer sam chip platio 800kn(osamsto slovima). kao drugo radio je 3 sata (riječima tri), i crko laser. u ta tri sata 4 puta je pao,al čisto sumnjam da je od toga,na to si mislio tonch? btw može mi neko pobliže objasnit onda kako sam ja popušio,tj. kakve veze ima laser s ugrađivanjem chipa?

pa kud covjece 800kn pa napisao sam ti da najvise 500kn,
a onda taj koji ti je ugradio chip preuzima garanciu tako da
ti mora popravit ili sta, a laser ti se ne iplati mjenjat!!!
a sto se tice lasera i marsa-
Similar to what has happened on the V9/V10 machines, there seem to be
some problems with the new V12 (SCPH-7000x) PS2s related to the laser
head drivers.

We have done some research and are presenting a solution that can be
applied to increase the life span of the lens. Please understand that
only time and further research will show if this can be considered the
final solution as there can be other factors (such as a bad batch of
controller, driver or lens) that could play a part in the V12 dead
"laser" syndrome.


The tracking and focus coils are driven by a power driver IC (the
infamous LA6508 on V9/V10 and what seems to be a custom part on the
V12) which in turn is driven by the PS2 CD/DVD controller.
The voltage swing on the coils can sometimes reach some very high
values causing some high current to flow thru them and in the long run
this can lead to a dead laser head and/or power driver.
-On V9 machines a common solution (the "Romeo mod") was to disconnect
the 12v power line used to drive tracking/focus and connect it to 5v,
automagically limiting the voltage swing on the coils.
-On the V12 PS2s this is no longer possible and a different solution
had to be found.This is the voltage behaviour on the tracking coils on
a brand new unmodified PSTWO:

dakle ukratko ti serviseri ili ko vec ugraduje chip ti ne
ugradetaj tvz. Romeo mod koji spriječava pregorivanje
LA driver
chipa ili lasera.
pitaj dal ti je u cijenu matrix fix ukljucen u cijenu, mada se to ne naplacuje dodatno
...