Ripovanje AVI, DVD, mini HD, Blu-Ray u MKV

   Dakle ripovanje AVI, DVD, mini HD, Blu-Ray u MKV itd..

MGMeUI 0.3.0.2014 (pri instalaciji se update-uje u novu verziju sa svim pratecim kodecima i neophodnim stvarcicama

pa onda Nero AAC Codec 1.1.34.2 , MKVToolNix v2.4.1 itd.

BTW. Hvala kolegama bubbi i icemacher-u na inspiraciji za ovaj post!!!

TUTORIAL FOR MeGUI AND ENCODING FROM HDrips AND DVDrips!

1. Installing and Updating:

install MeGUI, update it. (Update is a MUST! then load all profiles offered during the update!)

2. Opening and Creating Avisynth

Download Avisynth:

http://www.free-codecs.com/download/AviSynth.htm

When you run the program, File/Open your source film,(SOURCE MUST BE GOOD QUALITY -- HD, HDrip, DVDR, DVDrip or atleast R5 LINE --, don't bother with low quality sources) it will ask you to create AVS file, its mostly needed for resizing, cropping,filter information, and source path of course. Just untick/unselect the Resize, cause if you temper with the resolution it doesn't turns out quite well, so original resolution is fine without resizing.

Only HD and DVDR need to be resized and cropped!

3. x264 = H264 (Video codec)

Make sure that codec is x264 and container/extension/File Format is MKV. Use HQ Slower profile (it takes some time to encode, for me its like 3.5hrs, and on dual core processors its around 2hrs.) or even HQ slow (not much faster but with less command lines). Experiment with it, look at other people rips (especially Adzapper's, then compare to your own), maybe you find even better profile than HQ slower.

Right now I'm testing Sharktooth's custom profiles that can be found here:

Code:

http://forum.doom9.org/showthread.php?t=101813

4. Audio

Audio source (input) is the same as movie source file! Open it, then find the source video file. (example: if you have opened troy.avi then created avisynth script troy.avs, after that you click on Audio input "troy.avi file IS Audio input/source!)

Select it and open, select codec to be NDAAC (Nero Digital Audio Codec) Use profile NDAAC-HE-64kbs, then select Adaptive bitrate and set from 45-50kbs (thats enough for decent audio quality and extremely high compression!) or you can use LAME MP3, go to config, there is not much things you can do here just change the bitrate from 128 to 80 (below that, the sound isnt very good) click OK.

NDAAC (Nero Digital Audio) is one of the best codecs, probably even better than LAME cause it can do high audio compression while preserving decent audio quality at small bitrates.

If you don't have installed nero digital audio codec download it here:

Code:

http://www.nero.com/eng/nero-aac-codec.html

Then copy all the files (neroAacDec.exe, neroAacEnc.exe, neroAacEnc_SSE.exe, neroAacTag.exe) from extracted directory (win32) to C:/Program Files/MeGUI/. Do not copy the entire directory, only files.

5. Final Step

In the lower right corner you have "Autoencode" tab. Click on it.

Select a Container to be MKV (if it isn't already). This is where you decide the entire outcome/bitrate of the movie. Click "average bitrate" option and type the desired bitrate (example 500kbs total, 450kbs goes to video 50kbs to audio, of course if audio is set to 50kbs if it is set to higher bitrates then it will lower video bitrate), that is depending on movie duration your size and bitrate will vary. Aim to get the size 1MB BELOW the targeted size, if its 300MB rip, aim to 299MB, if its 400MB rip, aim to 399MB (this is because of compressing with winrar so you dont get fourth rar file on 300MB rips that is like 1-2MB's)

6. Encoding

In autoencode window click Queue. In upper left corner you have the tabs Input/Queue/Log. Click on Queue. Click Start. If no workers exist program will offer to create one!

And thats it. Now you have to wait , in my case 3 hrs. Not a very fast computer.

As Adzapper said, 100MB is 30min of the movie, 200MB is 60min of the movie, you get the point.

Naravno pri instalaciji "MeGUI" zajedno sa svim kodecima, AviSynth-om itd se update-uje, e sad donja slika (Tutorijal ne znaci da mora da se pravi 300-400 mb file:

PRVI STEP:

DRUGI STEP

TRECI STEP

ENCODING

Pa onda ajde i ovo, mozda zatreba:

Za spajanje filma iz dva dela u jedan film i leplenje titlova - kostite program - MkvMergeGUI

MKVmerge GUI... It's part of the MKVtoolnix package v.2.2.0

Dakle Program za to mozete naci na:

http://www.afterdawn.com/software/video_software/video_tools/mkvtoolnix.cfm

LEPLJENJE TITLOVA za mkv:

1.Instalirajte program MKV Toolnix v.2.2.0 (nalazi se u ovom folderu).Kad je instaliran program idemo

Start - All Programs - MKVToolnix - mkvmerge GUI , desni taster - Send To - Desktop (Create ShortCut).

Pokrenite program mkvmerge GUI.

2.Sada kada imate spremljen film MKV i titlove idete na ADD (nadjete gde ste smestili film) kliknite na film pa open.

3.Opet idete na ADD pa klik na titl pa open.

4.U donjem videcete video, audio i srt_eng ili neki drugi ako ima

(namojte da vas buni u nekim filmovima ima i dodatnih titlova kao srt_eng , srt_tur i td a u nekim nema)

i na kraju onaj vas srt_ser.

NAPOMENA:

Vasi titlovi moraju da su u SRT.SUB titlove ovaj program ne vidi.Konverzija iz sub u srt je laka

sa programom SubtitleWorkshop 2.51.Znaci dok namestate titlove za film na kraju ih sacuvajte u srt i nema problema.

5.Video , Audio treba da je stiklirano , takodje i vas srt_ser.Ako nekom ne treba srt_eng ( ja ga brisem)

treba samo odstiklirati taj titl i on ce nestati iz vaseg filma.

6.SAD kiknete jednom na srt_ser i onda ispod toga u delu pod Default track flag odaberete opciju Yes

7.Onda pod Format Specific Options i pod Subtitle Charset odaberete Windows-1250 (to je zato da se vide nasa slova)

8.Predlažem da novi mkv film bude u drugom direktorijumu kako se nebi mešali titlovi, to cete uraditi vrlo lako

jer ispod imate opciju Browse pa dajte putanju gde da se sacuva film.Sad idete na SAVE.

9.Kliknite na start muxig i sacekajte 3-4 minuta.

Zatvorite sve i proverite vas novi film da li ima titlove.Ako je sve u redu,

stari folder gde vam je film i titl sada mozete obrisati.

SPAJANJE mkv FILMA IZ DVA DELA U JEDAN mkv FILM:

1.Otvorite program MkvMergeGUI.

2.ADD nadjite gde vam je film , kliknite na prvi deo pa OPEN.

3.Sad idemo APPEND , kiknite na drugi deo pa open.

4.Start muxig , sacekajte 4-5 minuta i film je spojen.

NAPOMENA:

Kad ste zavrsili spajanje obavezno u novom filmu proverite ton u drugom delu filma

jer mi se desavalo da kod nekih filmova dolazi do desihronizacije slike i tona,

zbog lose uradjene konverzije u mkv.Ako je ton uredu mozete obrisati stare fajlove.

Jos nisam otkrio kako resiti ovaj problem ali on je zanemarljiv i vrlo redak

> na 50-tak filma doce vam sigurno 2-3 ovakva filma <

Dodatak:

Kako ubaciti srpske ili hrvatske titlove, ali da se vide naša slova ć, č.... a ne ono æ ð itd.

1. : Ubacite film i titlove koje bi koristili (recimo srpski i engleski)

2. : U donjem delu gde se štiklira kliknete na video, i onda ispod toga u delu Track Name ukucate ime filma i odaberete jezik engleski (samo pritisnete slovo e na tastaturi)

3. : Ovo isto uradite za audio

4. : Uradite korak 2 za srpski titl i pod Default track flag odaberete opciju Yes

5. : U delu za titl odete na Format Specific Options i pod Subtitle Charset odaberete Windows-1250

6. : Podesite engleski titl, i pod Default track flag odaberete opciju No.

7. : Kliknite na start muxig

8. : Za proveru titlova predlažem da fajl.mkv bude sam u direktorijumu kako se nebi mešali titlovi

To je to za sada...

Evo i nekih rezultata:

Download latest audio/video codecs & tools:

http://www.free-codecs.com/download/K_Lite_Codec_Pack.htm

http://www.free-codecs.com/download/Matroska_Pack.htm

http://www.free-codecs.com/download/Media_Player_Classic.htm

http://www.free-codecs.com/download/VideoLAN.htm

http://www.free-codecs.com/download/x264_Video_Codec.htm

U principu na ovom sajtu:

ima skoro sve sto je potrebno osim:

Nero AAC Codec-a i CoreAVC Professional Edition  

Obavezno!!!

Srecno    i sve sto nije jasno tu sam ja i kolege...   